Collections

Colour

Additional EN Norm Test	

Certification

Certification PPE

Closure

Coating type

Cut protection level

Environment of use

Fitting Shoes

Function

High vis co-certification

High vis classification

Hood

Lining

Material

Nail Penetration

Outsole Material

Palm material 

Safety Rating

Shoe Collection

Shoe Type

Toe Cap

Type of garment

Type of jacket

Type of work

Upper Material

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

Recommended Usage

NEW!

NEW COLOUR!

Quality 1512 is an inherent fabric which means that the flame resistant is built into the fibers. It is durable, light and comfortable. The fabric is certified for EN 1149-3, EN 61482-1-2, EN IEC 61482-1-1, EN ISO 11611, EN ISO 11612, EN 13034, EN ISO 20471.

Inherently flame resistant material that is wind and waterproof with breathability. The material is certified according to: EN ISO 11611, EN ISO 11612, EN ISO 1149, EN 61482-1-2, EN 61482-1-1, EN ISO 20471, EN 13034, EN 343.

A comfortable sweatshirt fabric in modacrylic- and cotton mix with best protection. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Comfortable and flexible single jersey with inherent flame resistant properties. The fabric is certified for EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Inherent flame resistant and polyester free material with laminate and a soft inside made of fleece. Wind- and waterproof. The material is certified accordning to: EN ISO 11611, EN ISO 11612, EN 1149-5, EN 61482-1-2, EN ISO 20471, EN 13034, EN 343

Metal-free craftsman trousers for use in areas that require flexibility and good protection. The trousers offer high comfort and sewn-on holster pockets. Raised rear waist section with elastic in the sides for enhanced comfort. Bellowed leg pockets, the left with an ID card holder, and two back pockets with press studs. 
Pre-bent knees with external knee pockets that open from below. Ankle width adjusts with press studs. Heat-applied reflective details on the back of the legs and on leg pockets. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11612, EN 61482-2.

Craftsman Inherent Trousers

Flame-resistant hood for shell jacket 4446, featuring reflective details for increased visibility. Completely metal-free and attaches with plastic press studs.
<ul>
<li>Size S fits model 4446 in sizes XS–S</li>
<li>Size L fits model 4446 in sizes M–XL</li>
<li>Size 2XL fits model 4446 in sizes 2XL–4XL</li>
</ul>

Flame-Resistant Hood

Bib and brace trousers made from a soft, flexible, and durable material, featuring a thin lining on the front. In the lined areas, the trousers are approved for the higher arc protection class—APC 2. 
Includes a bellows leg pocket with flap, internal ID card holder and mobile phone holder on the left side. Two back pockets with flaps equipped with press studs. This metal-free model uses plastic press studs and zips. 
Certified according to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 APC 1 (APC 2 in the lined areas), and EN 13034.

APC 2 Inherent Bib trousers

Bib and brace trousers made from inherently flame-resistant material, meaning the flame protection is built into the fibre’s structure. In the lined areas, the trousers are approved for the higher arc protection class—APC 2. The trousers are soft and flexible, with external kneepad pockets reinforced with CORDURA®/Kevlar®/Protal® material. 
These oil-, dirt-, and water-repellent trousers feature smart pocket solutions and elastic braces for enhanced comfort. Made from ripstop material with excellent tear strength. 
For increased durability, exposed pockets are reinforced with double layers. Tested and approved for 50 washes. 
Certified according to EN 14404, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 20471, EN ISO 11612, and EN 61482-2 APC 1 (APC 2 in the lined areas).

APC 2 Multinorm Inherent Bib trouser

Vest in a soft, supple material offering high durability. A popular model among installers and electricians who are used to carrying a lot of equipment. Several multifunctional pockets that help make day-to-day tasks easier. 
The vest is metal free and has plastic press studs and zip. Heat-applied reflective details for enhanced visibility and loops around the waist designed for a belt that can relieve weight.

Inherent Vest

Flame-resistant sweatshirt in a high-visibility design. Made from an inherent fabric with a brushed interior, making it soft and comfortable to wear while still providing excellent protective properties. Features segmented transfer reflectors for good stretch and breathability. 
Certified according to EN 1149-5, EN ISO 20471, EN ISO 11612, and EN 61482-2. 
Also available in women’s model 3454.

Sweatshirt Multinorm

Flame-resistant long-sleeved T-shirt in a high-visibility design. Made from a soft, lighter inherent fabric, making it breathable and comfortable to wear while still offering excellent protective properties. Features segmented transfer reflectors for good stretch and breathability. 
Certified according to EN 1149-5, EN ISO 20471, EN ISO 11612 and EN 61482-2. Also available in women’s model 3437.

Long-sleeved T-shirt Multinorm

Flame-resistant long-sleeved T-shirt in a high-visibility design. Made from a soft, lighter inherent fabric, making it breathable and comfortable to wear while still offering excellent protective properties. Features segmented transfer reflectors for good stretch and breathability. 
Certified according to EN 1149-5, EN ISO 20471, EN ISO 11612, and EN 61482-2. 
Also available in men’s model 3436.

Women's Long-sleeved T-shirt Multinorm

Flame-resistant sweatshirt in a high-visibility design. Made from an inherent fabric with a brushed interior, making it soft and comfortable to wear while still providing excellent protective properties. Features segmented transfer reflectors for good stretch and breathability. 
Certified according to EN 1149-5, EN ISO 20471, EN ISO 11612, and EN 61482-2. 
Also available in men’s model 3088.

Women's Sweatshirt Multinorm

Metal- and polyester-free softshell vest in Hi-vis that is inherently flame-resistant. 
The wind and water-resistant vest is made of 3-layer softshell material and has excellent breathability. It also has an extended back that improve the already fantastic comfort. 
The vest is equipped with two gas loops, which are designed to hang gas detectors, oxygen meters or microphones in. It serves excellently as a reinforcement garment in chilly conditions. 
Certified according to EN 1149-5, EN 13034, EN ISO 20471, EN ISO 11611, EN ISO 11612, EN 61482-2 , APC 2 Ebt 33 cal/cm² , ELIM 30 cal/cm²

Multinorm Softshell Vest

A women's fit industrial jacket in a soft, supple, comfortable, highly durable quality. The metal-free (buttons and covered zips in plastic) jacket has oil-, dirt- and water-repellent properties. Hidden chest pocket with zip, two front pockets with flaps and press studs, and loops for a microphone, oximeter or other technical device. 
Extended, width-adjustable back, and the cuff width is also adjustable using press studs. The collar can be closed with two press studs for extra protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Women's Inherent Jacket

A metal-free industrial jacket in a soft, supple, comfortable quality. Highly durable and oil-, dirt- and water-repellent. Hidden chest pocket with zip, two front pockets with flaps, and loops at the yoke for a microphone, oximeter or other technical device. 
Extended, adjustable back, and the cuff width is also adjustable using press studs. High collar for greater protection. Heat-applied reflective details on the shoulders, back and forearms. Tested and approved for industrial washing – EN 15797, max. 50 wash cycles. 
Certified to EN 1149-5, EN ISO 11611, EN ISO 11612, EN 61482-2 and EN 13034.

Inherent Jacket

A metal- and polyester-free softshell jacket made from inherently flame-resistant material. The oil-, dirt- and water-repellent jacket is crafted from comfortable 3-layer softshell material that is wind- and waterproof with excellent breathability. 
The fleece interior provides a cosy feel, enhancing comfort. An extended back adds to the overall comfort. The jacket is equipped with two gas loops for attaching gas detectors, oxygen meters and microphones, making it particularly useful for work in petrochemical environments or the oil and gas industry. 
Certified according to EN 1149-5, EN 13034, EN ISO 11611, EN ISO 11612, and EN 61482-2 APC 2. EBT - 33 cal/cm², ELIM - 30 cal/cm².

Women’s Inherent Softshell Jacket

A lightly padded shell jacket suitable for all seasons, made from a wind and waterproof breathable material with an oil- and dirt-repellent surface. With an antistatic and inherently flame-resistant design, completely metal-free, it minimizes the risk of ignition and meets all requirements of the ATEX directive.
The shell jacket features a high collar and a concealed, robust two-way plastic zip. Reflective details enhance visibility, along with an extended back and a drawstring hem. Prepared with attachment points for hood 2164, sold separately.
The jacket is equipped with two gas loops for attaching gas detectors, oxygen meters and microphones. This makes it especially useful for work in petrochemical environments or the oil and gas industry. Also suitable for the energy sector, including roles in solar, wind and hydro power.
Certified according to EN 343 4.1, EN 1149-5, EN ISO 11611, EN 13034, EN ISO 11612, EN 61482-2, APC 2.

Shell Jacket Inherent

Metal- and polyester-free softshell jacket that is inherently flame-resistant. 
The wind and water-resistant jacket is made of softshell material and has excellent breathability. It also has an extended back that improve the already fantastic comfort. 
The jacket is equipped with two gas loops, which are designed to hang gas detectors, oxygen meters or microphones in. 
Certified according to EN 1149-5, EN 13034, EN ISO 11611, EN ISO 11612 and EN 61482-2 APC 2. EBT - 33 cal/cm², ELIM - 30 cal/cm².

14181512

Craftsman Inherent Trousers

21641534

Flame-Resistant Hood

26181512

APC 2 Inherent Bib trousers

28901512

APC 2 Multinorm Inherent Bib trouser

30391512

Inherent Vest

30881762

Sweatshirt Multinorm

34361737

Long-sleeved T-shirt Multinorm

34371737

Women's Long-sleeved T-shirt Multinorm

34541762

Women's Sweatshirt Multinorm

38491560

Multinorm Softshell Vest

40701512

Women's Inherent Jacket

44071512

Inherent Jacket

44421560

Women’s Inherent Softshell Jacket

44461534

Shell Jacket Inherent

44471560

Flame Resistant Softshell Jacket